EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Cost Controller is really a hugely economical solar controller suitable for off-grid solar units. According to multiphase synchronous rectification know-how, it makes certain optimized Power conversion and procedure balance for a variety of photovoltaic (PV) apps.
Critical Functions with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar energy harvesting. Key attributes contain:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with serious-time details checking.
Many Load Regulate Modes which include handbook and timer.
Thorough Electronic Protections in opposition to overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the product selection and voltage scores match your solar panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site close to the battery bank.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Manage right clearance for warmth dissipation.
three. Wiring the Solar Cost Controller
Caution: Constantly follow good security protocols and ensure the procedure is driven off in advance of connecting factors.
Action 1: Connect the battery terminals into the cost controller (optimistic to beneficial, negative to destructive).
Phase 2: Join the photo voltaic panel visit here array for the PV input terminals.
Action 3: Connect the load terminals if employing a immediate load connection.
Move four: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Settings
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Exhibit to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Checking and Information Logging
The Tracer AN Collection supports true-time monitoring utilizing the MT50 remote meter.
Details might be logged by way of the RS485 interaction port employing software program which include Solar Station PC.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Frequent Problems
Issue one: No Energy Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: Around-Voltage Safety
Validate the solar array’s voltage score.
Modify process parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT settings during the menu.
Benefits of the Tracer AN Series with MSR Engineering
The multiphase synchronous rectification technologies makes sure:
Larger Performance: Lowered Electrical power losses in the course of conversion.
Increased Trustworthiness: Steady general performance below variable masses.
Longer Battery Daily life: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy generation and extending battery lifetime. By following the above set up guide, end users can be certain optimum efficiency and method longevity.